User's Manual

Install an XS-240W-A or XS-250WX-A indoor ONT
68
7368 ISAM ONT XS-240W-A XS-250WX-A Product
Guide
Edition 01 Issue: 01
The XS-240W-A or XS-250WX-A indoor ONT must be mounted in a horizontal position, as
indicated by the wall mounting key holes in Figure 21. If possible, mount the ONT on a wall
stud.
i Attach the wall mount adapter bracket (shipped wit h the ONT) to the two wall mounting
keyholes on the ONT.
Figure 21 XS-240W-A and XS-250WX-A indoor ONT wall mounting key
holes
ii Attach the ONT to the wall.
3 Review the connection locations as shown in Figures 22.
Figure 22 XS-240W-A and XS-250WX-A indoor ONT connections
Note that the 10 GE UNI port is only featured on the XS-250WX-A.
4 Connect the Ethernet cables to the RJ-45 ports; see Figure 22 for the location of the RJ-45
ports.
TEL1 TEL2 LAN1 LAN2 LAN3 LAN4 10G POWER
UPS
ON/OFF
RESTORE
CLASS 1 LASER
PRODUCT
Wall mounting bracket
Wall mounting kole
Connections
Fiber guard
26021
26204
TEL1 TEL2 LAN1 LAN2 LAN3 LAN4 10GE POWER
UPS
ON/OFF
RESTORE
POTS
line 1 and 2
Ethernet
lines 1-4 10 GE
connection
Power supply
connection
Power
connection
On/off
button
Reset
button
R05.06.00 | March 2017 | 3FE 46861 AAAA TCZZA | Edition 01