User's Manual

7368 ISAM ONT XS-240W-A XS-250WX-A Product
Guide
Configure an XS-240W-A or XS-250WX-A indoor
ONT
Issue: 01 Edition 01 121
Table 41 Access control parameters
2 Select a WAN connection from the drop-down menu.
3 Select the checkbox to enable Trusted Network.
4 Select an access control level for each of the four protocols: ICMP, SSH, HTTP, and TR-069
for both the WAN and the LAN side.
5 Click Save.
6 Optionally, add one or more subnet trusted networks.
The maximum number of entries is 32.
You can also use the Source IP fields to delete a previously created entry for a subnet trusted
network.
7 STOP. This procedure is complete.
8.2.5 Application configuration
XS-240W-A and XS-250WX-A ONT also supports application configuration,
including:
• port forwarding
• DDNS
• NTP
• USB storage
• UPnP and DLNA
• voice setting
Field Description
WAN Choose a connection from the drop-down menu
Trusted Network Enable Select this checkbox to enable trusted network
ICMP, Telnet, SSH, HTTP,
TR-069, HTTPS
Select an access control level for each protocol:
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny
Source IP Start Enter a start IP address for the new subnet trusted network
Source IP End Enter an end IP address for the new subnet trusted network
R05.06.00 | March 2017 | 3FE 46861 AAAA TCZZA | Edition 01