User's Manual

7368 ISAM ONT XS-240W-A XS-250WX-A Product
Guide
Configure an XS-240W-A or XS-250WX-A indoor
ONT
Issue: 01 Edition 01 113
Table 35 QoS Config parameters
2 Choose a QoS type from the drop-down menu: L2 or L3.
3 Configure a QoS policy.
4 Click Add to add a QoS policy.
5 STOP. This procedure is complete.
8.2.4 Security configuration
XS-240W-A and XS-250WX-A ONT also supports security configuration, including:
• firewall
• MAC filter
• IP filter
• URL filter
Field Description
Type Choose a QoS type from the drop-down menu: L2 or L3
Source MAC Enter the source MAC.
Select the Exclude checkbox to exclude the source MAC
Interface Choose an interface from the drop-down menu
802.1p Mark Enter the value for the 802.1p (range: 0-7)
DSCP Mark Enter the value for the DSCP mark (range: 0-63)
Additional fields for L3
Protocol Select a protocol from the drop-down menu, or select the Exclude checkbox
Application Select an application from the drop-down menu
Source IP and
Source IP Mask
Enter the values for the source IP and IP mask, or select the Exclude checkbox
Destination IP and
Destination IP Mask
Enter the values for the destination IP and IP mask, or select the Exclude checkbox
Source Port and
Source Port Max
Enter the values for the source port and port max (highest port number) or select the
Exclude checkbox
Destination Port and
Destination Port Max
Enter the values for the destination port and port max (highest port number), or select
the Exclude checkbox
R05.06.00 | March 2017 | 3FE 46861 AAAA TCZZA | Edition 01