User's Manual

1 — G-241W-A unit data sheet
1-6 Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
Table 1-4 describes the physical connections for G-241W-A indoor ONTs.
Table 1-4 G-241W-A indoor ONT physical connections
Note
(1)
The primary path for the earth ground for these ONTs is provided by the 12V Return signal in the
power connector.
1.5 G-241W-A LEDs
Figure 1-3 shows the G-241W-A indoor ONT LEDs.
Connection
(1)
Description
Ethernet ports This connection is provided through Ethernet RJ-45 cables. Up to four
10/100/1000 Base-T Ethernet interfaces are supported.The Ethernet
ports can support both data and in-band video services on all four
interfaces.
POTS This connection is provided through RJ-11 ports. Up to two POTS
connections are supported.The POTS ports support voice services.
WPS button The Wi-Fi Protected Setup switch is labeled WPS. This button enables
and disables the WPS mode.
RF video coaxial This connection is provided through a F-Type coaxial connector.
Power This connection is provided through the power connector. A power
cable fitted with a Molex connector is used to make the connection.
Fiber optic This connection is provided through a GPON SC/APC fiber optic
connector.
USB ports This connection is provided by two USB host ports, compliant to USB
2.0.
Cables with A-type connectors are used to connect to the USB ports.