User's Manual

3 — Replace a G-241W-A indoor ONT
Alcatel-Lucent 7368 ISAM ONT 3-5
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
Figure 3-2 G-241W-A indoor ONT connections (USB host port)
5 Replace the ONT with a new unit:
a On a flat surface, such as a desk, substitute a replacement ONT for the old
ONT.
b On a wall.
i Slide the old ONT off of the mounting screws until the ONT is free of the
wall.
ii Slide the wall mount holes on the ONT enclosure or fiber storage tray of
the new ONT over the mounting screws until it is securely seated.
6 Connect the Ethernet cables directly to the RJ-45 ports; see Figure 3-1 for the
location of the RJ-45 ports.
7 Connect the POTS cables directly to the RJ-11 ports; see Figure 3-1 for the
location of the RJ-11 ports.
8 If used, connect the coaxial cable to the F-type connector. See Figure 3-1 for
location of the F-type connector.
Danger — A shock hazard exists when working with the coaxial cable
for the RF video connection. Wear protective gloves and take all
necessary precautions to ensure personal safety.
USB port
22788