User's Manual

2 — Install a G-241W-A indoor ONT
2-4 Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
2.6 Procedure
Use this procedure to install a G-241W-A indoor ONT.
1 Place the indoor ONT unit:
a On the flat surface, such as a desk.
i Wrap the excess optic cable inside the fiber storage tray.
ii Attach the fiber storage tray to the ONT.
iii Place the ONT on the flat surface, horizontally resting on its four feet.
b On a wall.
i Determine whether to mount the G-241W-A indoor ONT in either the
vertical or horizontal position. If possible, mount the ONT on a wall
stud.
ii Mark the wall with the location of the mounting holes shown in
Figures 2-1 and 2-2. These holes should be the same distance apart as
the distance between the centers of the keyholes on the ONT. Use the
one of the two available fiber storage trays as a wall mounting template
to indicate the location of the mounting holes on the wall.
Figure 2-1 Wall mounting keyholes of the G-241W-A indoor ONT with fiber storage tray
attached
22441
Vertical
mounting
keyholes
Horizontal mounting keyholes