User's Manual

3 — Replace a G-240WZ-A indoor ONT
3-4 Alcatel-Lucent 7368 ISAM ONT
Edition 01
G-240WZ-A Product Guide
3.6 Procedure
Use this procedure to replace a G-240WZ-A indoor ONT.
1 Deactivate the ONT services at the P-OLT.
If you are using the SLID feature, this step is not required. The ONT and the
services can remain in service (IS).
i Use the RTRV-ONT command to verify the ONT status and th associated
services. Record the serial number or the SLID of the ONT displayed in the
command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
ii If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
2 If used, disable the Wi-Fi service by pressing the WLAN button; see Figure 3-1 for
the location of the WLAN button.
Figure 3-1 G-240WZ-A indoor ONT connections
3 Power down the unit by using the on/off power switch.
4 Disconnect the POTS, Ethernet, and power cables from the ONT; see Figure 3-1 for
the connector locations on the G-240WZ-A indoor ONT.
25260
USB2.0 TEL 1-2 LAN 1-4
WPS 2.4G WLAN
WPS 5G
Pairing
Reset
Power
ON/OFF
UPS
USB2.0 TEL1 TEL2 LAN1 LAN2 LAN3 LAN4
WPS 2.4G
WLAN
WPS 5G PAIRING RESET POWER ON/OFF
UPS
R05.04.00 | March 2016 | 3FE-45933-AAAA-TCZZA | Edition 01