User's Manual

R05.07.00 | September 2017 | Edition 02
Configure a G-240W-F indoor ONT
104
3FE-47087-AAAA-TCZZA
Issue: 01
8
Click Save Changes.
9
STOP. This procedure is complete.
Procedure 21 IP Routing configuration
1
Select Network > IP Routing from the top-level menu in the GPON Home Gateway window,
as shown in Figure 43.
Figure 43 IP Routing network window
Table
28 describes the fields in the IP Routing network window.
Table 28 IP Routing network parameters
Field
Description
Enable Routing
Select this checkbox to enable routing
Destination IP Address
Enter the destination IP address
Destination Netmask
Enter the destination network mask
Gateway
Enter the gateway address
(1 of 2)