User's Manual

R05.07.00 | September 2017 | Edition 02

Configure a G-240W-F indoor ONT

7368 ISAM ONT G-240W-F Product Guide

3FE-47087-AAAA-TCZZA

Issue: 01

Procedure 17 WAN networking configuration

Select Network > WAN from the top-level menu in the GPON Home Gateway window, as

shown in Figure 39.

Figure 39 WAN network window

Table

25 describes the fields in the WAN network window.

Table 25 WAN network parameters

Field

Description

WAN Connection List

Choose a WAN connection from the drop-down menu to set the connection

parameters

Connection Type

Select a connection type: IPoE or PPPoE

IP Mode

Choose an IP mode from the drop-down menu: IPv4 or IPv6

Enable/Disable

Select this checkbox to enable the WAN connection

NAT

Select this checkbox to enable NAT

Service

Select the checkboxes to enable service types for this connection

Enable VLAN

Select this checkbox to enable VLAN

VLAN ID

Enter the VLAN ID

VLAN PRI

Enter the VLAN PRI

WAN IP Mode

Choose an IP mode from the drop-down menu

(1 of 2)