User's Manual

R05.07.00 | September 2017 | Edition 02
Configure a G-240W-F indoor ONT
7368 ISAM ONT G-240W-F Product Guide
90
3FE-47087-AAAA-TCZZA
Issue: 01
3 Click Refresh to update the displayed information.
4 STOP. This procedure is complete.
Procedure 12 Optics module status retrieval
1 Select Status > Optics Module Status from the top-level menu in the GPON Home Gateway
window, as shown in Figure 34.
Figure 34 Optics module status window
Table
21 describes the fields in the Optics module status window.
Table 21 Optics module status parameters
Field
Description
Laser Bias Current (ONT ANI-ONT-Side Optical
Measurements)
Laser bias current, measured in uA
Optics Module Voltage (ONT ANI-ONT-Side Optical
Measurements)
Optics module voltage, measured in V
Optics Module Temperature (ONT ANI-ONT-Side
Optical Measurements)
Optics module temperature, measured in C
Rx Optics Signal Level at 1490 nm (ONT
ANI-ONT-Side Optical Measurements)
Received optics signal level at 1490 nm, measured
in dBm
(1 of 2)