User's Manual

R05.07.00 | September 2017 | Edition 02
7368 ISAM ONT G-240W-F Product Guide
Replace a G-240W-F indoor ONT
Issue: 01
3FE-47087-AAAA-TCZZA
77
Figure 27 G-240W-F indoor ONT fiber optic port (bottom view)
Connections (back)
Antenna Antenna
Fiber raceway
US B 1 US B 2 LA N 1 LA N 2 LA N 3 LA N 4 TE L 1 T EL 2 POWER ON/OFF
ON/OFF
buttons
(side)
Fiber optic port
LEDs (front)
26032
Danger — Fiber cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.
i Unplug the fiber optic cable with SC/APC connector from the fiber optic port on the
bottom of the ONT; see Figure 27 for the location of the fiber optic port.
ii Attach a fiber dust cover to the end of the SC/APC (SC/UPC) connector.
6 Replace the ONT with a new unit:
a On a flat surface, such as a desk or shelf, substitute the new ONT for the old ONT,
horizontally resting on its four feet.
b On a wall.
i Slide the old ONT off of the mounting screws until the ONT is free of the wall.
ii Slide the wall mount holes on the ONT enclosure over the mounting screws until
it is securely seated.
7 Connect the Ethernet cables directly to the RJ-45 ports; see Figure 26 for the location of the
RJ-45 ports.
8 Connect the POTS cables directly to the RJ-11 ports as per local practices; see Figure 26 for
the location of the RJ-11 ports.
RE S ET
LE D
WL AN
WP S