User's Manual

R05.07.00 | September 2017 | Edition 02
Install a G-240W-F indoor ONT
7368 ISAM ONT G-240W-F Product Guide
68
3FE-47087-AAAA-TCZZA
Issue: 01
iii Drill the two holes in the wall where the ONT will be mounted and then drive the
mounting screws into the holes.
The recommended length of mounting screw is 1.15 in. (3.8 cm).
Do not drive the screw into the wall completely. Leave approximately 1/8 in. (6 mm)
between the screw head and the wall surface.
iv Slide the wall mount keyholes on the ONT enclosure down over the mounting screws
until the ONT is securely seated.
3 Review the connection locations as shown in Figures 22 and 23.
Figure 22 G-240W-F indoor ONT connections (back view)
Power
input
On/off
button
26031
Antenna
Antenna
USB ports (2)
Ethernet ports (4) POTS ports (2)