User's Manual

R05.07.00 | September 2017 | Edition 02
Configure a G-240W-F indoor ONT
7368 ISAM ONT G-240W-F Product Guide
150
3FE-47087-AAAA-TCZZA
Issue: 01
4 Click Save/Apply.
5 STOP. This procedure is complete.
Procedure 57 SLID configuration
1 Select Maintenance > SLID Configuration from the top-level menu in the SFU GPON Home
Gateway window, as shown in Figure 79.
Figure 79 SLID configuration window
Table
53 describes the fields in the SLID configuration window.
Table 53 SLID configuration parameters
Field
Description
Current SLID
Displays current SLID
Input new SLID
Enter new SLID
SLID Mode
Choose a SLID mode from the drop-down menu: HEX or ASCII
In ASCII mode, the maximum number of characters is 12, for example: abcdefg123.
In HEX mode, the maximum number of characters is 20, for example:
1234567890ABCDEF1234
2 Configure the new SLID.