User's Manual

R05.07.00 | September 2017 | Edition 02
7368 ISAM ONT G-240W-F Product Guide
Configure a G-240W-F indoor ONT
Issue: 01
3FE-47087-AAAA-TCZZA
149
3 Click Save.
4 STOP. This procedure is complete.
Procedure 56 LOID configuration
1 Select Maintenance> LOID Config from the top-level menu in the SFU GPON Home
Gateway window, as shown in Figure 78.
Figure 78 LOID Authentication window
Table
52 describes the fields in the LOID configuration window.
Table 52 LOID configuration parameters
Field
Description
LOID
Type the LOID; the maximum number of characters is 24
If the password is null, this field may be left blank
Password
Type the password; the maximum number of characters is 12
2 Enter the LOID.
3 Enter the password, if applicable.