User's Manual

R05.07.00 | September 2017 | Edition 02
Configure a G-240W-F indoor ONT
7368 ISAM ONT G-240W-F Product Guide
142
3FE-47087-AAAA-TCZZA
Issue: 01
2 Configure the test times if desired.
3 Click Refresh to update the data.
4 STOP. This procedure is complete.
8.3 SFU mode GUI configuration
Use the procedures below to use the web-based GUI for the G-240W-F in SFU
mode.
SFU customer premise devices are designed for single indoor residential
applications. These ONTs address the demand for bandwidth intensive services,
such as high definition television (HDTV), video-on-demand (VOD) and online
games. The ONT can be configured to seamlessly deliver voice-over-IP and high
speed Internet access via a single fiber optic connection to the home.
8.3.1 Login
Use the procedure below to login to the web-based GUI for the G-240W-F.
Procedure 51 Login to web-based GUI
1 Open a web browser and enter the IP address of the ONT in the address bar.
The login window appears.
The default gateway IP address is http://192.168.1.254. You can connect to this IP address
using your web browser after connecting your PC to one of Ethernet ports of the ONT. The
static IP address of your PC must be in the same subnet as the ONT.
2 Enter your username and password in the Log in window, as shown in Figure 73.
The default username is AdminGPON. The default password is ALC_FGU.