User's Manual

R05.07.00 | September 2017 | Edition 02
Configure a G-240W-F indoor ONT
7368 ISAM ONT G-240W-F Product Guide
124
3FE-47087-AAAA-TCZZA
Issue: 01
2 Select the Enable NTP Service checkbox to enable NTP service.
3 Click Save.
4 STOP. This procedure is complete.
Procedure 36 USB configuration
1 Select Application > USB from the top-level menu in the Ethernet Gateway window, as shown
in Figure 58.
A USB printer that is connected to the ONT is available to all LAN devices.
Figure 58 USB window
Table
42 describes the fields in the USB window.
Table 42 USB parameters
Field
Description
Enable FTP server
Select this checkbox to enable using an FTP server
(1 of 2)