User's Manual

R05.07.00 | September 2017 | Edition 02

Configure a G-240W-F indoor ONT

7368 ISAM ONT G-240W-F Product Guide

118

3FE-47087-AAAA-TCZZA

Issue: 01

Procedure 31 Access control configuration

This procedure describes how to configure the access control level (ACL).

Note 1 — ACL takes precedence over the firewall policy.

Note 2 — The trusted network object will be shared for all WAN

connections; it is not applied individually to a WAN connection.

Select Security > Access Control from the top-level menu in the GPON Home Gateway

window, as shown in Figure 53.

Figure 53 Access Control window

Table

38 describes the fields in the Access Control window.

Table 38 Access control parameters

Field

Description

WAN

Choose a connection from the drop-down menu

Trusted Network Enable

Click to enable or disable

ICMP, Telnet, SSH, HTTP,

TR-069, HTTPS, SFTP

Select an access control level for each protocol:

WAN side: Allow, Deny, or Trusted Network Only

LAN side: Allow or Deny

Source IP Start

Enter a start IP address for the new subnet trusted network

(1 of 2)