User's Manual

R05.07.00 | September 2017 | Edition 02
Configure a G-240W-F indoor ONT
7368 ISAM ONT G-240W-F Product Guide
108
3FE-47087-AAAA-TCZZA
Issue: 01
3 Click Save.
4 STOP. This procedure is complete.
Procedure 24 QoS configuration
1 Select Network > QoS Config from the top-level menu in the Home Gateway window.
Figure 46 shows the window for configuring QoS L2 (Layer 2 packet sizes).
Figure 46 QoS Config window (L2)
Table
31 describes the fields in the QoS Config window.
Table 31 QoS Config parameters
Field
Description
Type
Choose a QoS service layer type from the drop-down menu L2 or L3.
Source MAC
Enter the source MAC.
Select the Exclude checkbox to exclude the source MAC
Interface
Choose an interface from the drop-down menu
(1 of 2)