User's Guide
Table Of Contents
- 7368 ISAM ONT G-240W-F Product Guide
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI ONT safety guidelines
- 3 ETSI environmental and CRoHS guidelines
- 4 ANSI ONT safety guidelines
- 5 G-240W-F unit data sheet
- 5.1 G-240W-F part numbers and identification
- 5.2 G-240W-F general description
- 5.3 G-240W-F software and installation feature support
- 5.4 G-240W-F interfaces and interface capacity
- 5.5 G-240W-F LEDs
- 5.6 G-240W-F detailed specifications
- 5.7 G-240W-F GEM ports and T-CONTs
- 5.8 G-240W-F performance monitoring statistics
- 5.9 G-240W-F functional blocks
- 5.10 G-240W-F standards compliance
- 5.11 G-240W-F special considerations
- 6 Install a G-240W-F indoor ONT
- 7 Replace a G-240W-F indoor ONT
- 8 Configure a G-240W-F indoor ONT
- 9 ONT configuration file over OMCI
- Customer document and product support
Replace a G-240W-F indoor ONT
78
7368 ISAM ONT G-240W-F Product Guide
Edition 01 Issue: 01
3 Power down the unit by using the on/off power switch; see Figure 25 for the location of the
power switch.
Figure 25 G-240W-F indoor ONT connections (back view)
4 Disconnect the POTS, Ethernet, and power cables from the ONT; see Figure 25 for the
connector locations on the G-240W-F indoor ONT.
5 Disconnect the fiber optic cable; see Figure 26 for the location of the fiber optic port on the
bottom of the ONT..
DRAFT