User's Guide
Table Of Contents
- 7368 ISAM ONT G-240W-F Product Guide
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI ONT safety guidelines
- 3 ETSI environmental and CRoHS guidelines
- 4 ANSI ONT safety guidelines
- 5 G-240W-F unit data sheet
- 5.1 G-240W-F part numbers and identification
- 5.2 G-240W-F general description
- 5.3 G-240W-F software and installation feature support
- 5.4 G-240W-F interfaces and interface capacity
- 5.5 G-240W-F LEDs
- 5.6 G-240W-F detailed specifications
- 5.7 G-240W-F GEM ports and T-CONTs
- 5.8 G-240W-F performance monitoring statistics
- 5.9 G-240W-F functional blocks
- 5.10 G-240W-F standards compliance
- 5.11 G-240W-F special considerations
- 6 Install a G-240W-F indoor ONT
- 7 Replace a G-240W-F indoor ONT
- 8 Configure a G-240W-F indoor ONT
- 9 ONT configuration file over OMCI
- Customer document and product support
7368 ISAM ONT G-240W-F Product Guide ONT configuration file over OMCI
Issue: 01 Edition 01 153
9 ONT configuration file over OMCI
9.1 Purpose
9.2 Supported configuration file types
9.3 ONT configuration file over OMCI
9.1 Purpose
This procedure describes how to use configuration files over OMCI to configure
ONTs. Some advantages include:
• flexibility to change the ONT default behavior by downloading configuration file
• flexibility to update a deployed ONT by downloading updated parameters
• ability to securely download any configuration file to an ONT
• ability to avoid using embedded configuration files in ONT software
9.2 Supported configuration file types
Table 56 describes the configuration file types that are supported from 7368 ISAM
ONT R05.02.00 and later.
Note — This feature is supported for use with the 7360 ISAM
FX and the 7342 ISAM FTTU.
DRAFT