User's Manual

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01
4 — Configure a G-240W-B indoor ONT
3 Click Add.
4 STOP. This procedure is complete.
Procedure 4-19 DMZ and ALG configuration
1 Select Security > DMZ and ALG from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-19.
Figure 4-19 DMZ and ALG window
Table 4-18 describes the fields in the DMZ and ALG window.
Table 4-18 DMZ and ALG parameters
Field
Description
ALG Config
Select the checkboxes to enable the protocols to be supported by the ALG
DMZ Config
WAN Connection
List
Choose a WAN connection from the drop-down menu
Enable DMZ
Select this checkbox to enable DMZ on the chosen WAN connection
DMZ IP Address
Choose Customer Setting and enter the DMZ IP address or choose the IP
address of a connected device from the drop-down menu
2 Configure ALG.
3 Click Save ALG.
4 Configure DMZ.
4-26 Alcatel-Lucent 7368 ISAM ONT
Edition 01
G-240W-B Product Guide