User's Manual

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01
4 — Configure a G-240W-B indoor ONT
Procedure 4-18 IP filter configuration
1 Select Security > IP filter from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-18.
Figure 4-18 IP filter window
Table 4-17 describes the fields in the IP filter window.
Table 4-17 IP filter parameters
Field
Description
Enable IP Filter
Select this checkbox to enable an IP filter
Mode
Choose an IP filter mode from the drop-down menu:
• Drop for upstream
• Drop for downstream
Internal Client
Choose an internal client from the drop-down menu:
• Customer setting - uses the IP address input below
• IP - uses the connecting devices' IP to the ONT
Local IP Address
Local IP address
Source Subnet
Mask
Source subnet mask
Remote IP Address
Remote IP address
Destination Subnet
Mask
Destination subnet mask
Protocol
Choose an application protocol or all from the drop-down menu
2 Configure the IP filter.
Alcatel-Lucent 7368 ISAM ONT 4-25
Edition 01
G-240W-B Product Guide