User's Manual

ManualsBrandsAlcatel-Lucent Shanghai Bell ManualsElectronicsGPON ONU

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01

4 — Configure a G-240W-B indoor ONT

Table 4-10 WiFi 2.4G network parameters

Field

Description

Enable

Select this checkbox to enable WiFi

Mode

Choose a wi-fi mode from the drop-down menu:

• auto (b/g/n)

• b

• g

• n

• b/g

Channel

Choose a channel from the drop-down menu or choose Auto to have the

channel automatically assigned

Bandwidth

Choose 20 MHz or 40 MHz from the drop-down menu.

Transmitting

Power

Choose the percentage transmitting power from the drop-down menu

SSID Select

Choose the SSID from the drop-down menu

SSID Name

Enter the SSID name

Enable SSID

Enable or disable SSID from this drop-down menu

SSID Broadcast

Enable or disable SSID broadcast from this drop-down menu

Port Mode

Choose a port mode from the drop-down menu:

• Route

• Bridge

Encrypt Mode

Choose an encryption mode from the drop-down menu:

• OPEN

• WEP

• WPA/WPA2 Personal

• WPA/WPA2 Enterprise

WPA Version

Choose a WPA version from the drop-down menu:

• WPA1

• WPA2

• WPA1/WPA2

WPA Encryption

Mode

Choose a WPA encryption mode from the drop-down menu:

• TKIP

• AES

• TKIP/AES

WPA Key

Enter the WPA key

Enable WPS

Enable or disable WPS from this drop-down menu

2 Configure the WiFi connection.

3 If you have enabled and configured WPS, click WPS connect.

4 Click Save.

5 STOP. This procedure is complete.

Alcatel-Lucent 7368 ISAM ONT 4-17

Edition 01

G-240W-B Product Guide