User's Manual

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01

4 — Configure a G-240W-B indoor ONT

Procedure 4-10 WAN networking configuration

1 Select Network > WAN from the top-level menu in the GPON Home Gateway

window, as shown in Figure 4-10.

Figure 4-10 WAN network window

Table 4-9 describes the fields in the WAN network window.

Table 4-9 WAN network parameters

Field

Description

WAN Connection

List

Choose a WAN connection from the drop-down menu to set the connection

parameters

Connection Type

Select a connection type: IPoE or PPPoE

IP Mode

Choose an IP mode from the drop-down menu: IPv4 or IPv6

Enable/Disable

Select this checkbox to enable the WAN connection

NAT

Select this checkbox to enable NAT

Service

Select the checkboxes to enable service types for this connection

Enable VLAN

Select this checkbox to enable VLAN

VLAN ID

Enter the VLAN ID

VLAN PRI

Enter the VLAN PRI

WAN IP Mode

Choose an IP mode from the drop-down menu

(1 of 2)

Alcatel-Lucent 7368 ISAM ONT 4-15

Edition 01

G-240W-B Product Guide