User's Manual

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01
4 — Configure a G-240W-B indoor ONT
5 Click Save.
6 Bind a MAC address to the LAN by entering the MAC and IP addresses and then
clicking Add. Repeat for all MAC addresses to be bound.
7 STOP. This procedure is complete.
Procedure 4-9 LAN IPv6 networking configuration
1 Select Network > LAN_IPv6 from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-9.
Figure 4-9 LAN IPv6 network window
Table 4-8 describes the fields in the LAN IPv6 network window.
Table 4-8 LAN IPv6 network parameters
Field
Description
DNS Server
Choose a DNS server from the drop-down menu.
prefix config
Choose a prefix config option from the drop-down menu, either
WANConnection (prefix will be obtained from the WAN) or Static (enables you
to enter the prefix).
prefix
This field appears if you selected the “Static” option for the “prefix config”
field. Type a connection.
Interface
This field appears if you selected the Wan Connection option for the “prefix
config” field. Choose a WAN connection interface from the drop-down menu.
(1 of 2)
Alcatel-Lucent 7368 ISAM ONT 4-13
Edition 01
G-240W-B Product Guide