User's Manual

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01
3 — Replace a G-240W-B indoor ONT
5 Disconnect the fiber optic cables.
Danger — Fiber cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.
Câbles de fibres transmettent la lumière laser invisible.
Pour éviter des lésions oculaires ou la cécité, ne jamais regarder
directement dans les fibres, connecteurs ou adaptateurs
i Unplug the fiber optic cable with SC/APC connector from the ONT; see
Figure 3-1 for the location of the fiber optic port.
ii Attach a fiber dust cover to the end of the SC/APC connector.
6 Replace the ONT with a new unit:
a On a flat surface, such as a desk, substitute the new ONT for the old ONT on
a flat surface, horizontally resting on its four feet.
b On a wall.
i Slide the old ONT off of the mounting screws until the ONT is free of the
wall.
ii Slide the wall mount holes on the ONT enclosure over the mounting
screws until it is securely seated.
7 Connect the Ethernet cables directly to the RJ-45 ports; see Figure 3-1 for the
location of the RJ-45 ports.
8 Connect the POTS cables directly to the RJ-11 ports as per local practices; see
Figure 3-1 for the location of the RJ-11 ports.
The RJ-11 port to the left is labeled 1 for Line 1 while the port on the right is
labeled 2 for Line 2.
9 If required, have approved service personnel who are trained to work with optic
fiber clean the fiber optic connection. See the 7368 ISAM ONT Configuration,
Management, and Troubleshooting Guide for more information about fiber optic
handling, inspection, and cleaning.
Danger — Fiber optic cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.
Câbles de fibre optique transmettent la lumière laser
invisible. Pour éviter des lésions oculaires ou la cécité, ne jamais
regarder directement dans les fibres, les connecteurs ou adaptateurs.
10 Connect the fiber optic cable with SC/APC adapter into the SC/APC connector.
Figure 3-1shows the location of the SC/APC connector.
Danger — Fiber cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.
Câbles de fibre optique transmettent la lumière laser
invisible. Pour éviter des lésions oculaires ou la cécité, ne jamais
regarder directement dans les fibres, les connecteurs ou adaptateurs.
Warning — Be careful to maintain a bend radius of no less than 1.5 in.