User's Manual

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01
3 — Replace a G-240W-B indoor ONT
3.6 Procedure
Use this procedure to replace a G-240W-B indoor ONT.
1 Deactivate the ONT services at the P-OLT.
If you are using the SLID feature, this step is not required. The ONT and the
services can remain in service (IS).
i Use the RTRV-ONT command to verify the ONT status and th associated
services. Record the serial number or the SLID of the ONT displayed in the
command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
ii If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
2 If used, disable the Wi-Fi service by pressing the WLAN button; see Figure 3-1 for
the location of the WLAN button.
Figure 3-1 G-240W-B indoor ONT connections
Wireless
On/Off
button
USB 3.0 USB 2.0 TEL1 TEL2 LAN1 LAN2 LAN3 LAN4 POWER ON/OFF UPS
USB
ports
POTS
ports (2)
(RJ-11)
Ethernet
ports (4)
(RJ-45)
Wi-Fi
security
buttons (2)
Reset
button
Power
input
On/Off
button
Fiber
optic
port
24614
3 Power down the unit by using the on/off power switch.
4 Disconnect the POTS, Ethernet, and power cables from the ONT; see Figure 3-1 for
the connector locations on the G-240W-B indoor ONT.
3-4 Alcatel-Lucent 7368 ISAM ONT
Edition 01
G-240W-B Product Guide