User's Manual

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01
1 — G-240W-B unit data sheet
Connection
(1)
Description
POTS ports
This connection is provided through RJ-11 ports. Up to two POTS
connections are supported.The POTS ports support voice services.
Ethernet ports
This connection is provided through Ethernet RJ-45 connectors. Up to
four 10/100/1000 Base-T Ethernet interfaces are supported.The
Ethernet ports can support both data and in-band video services on all
four interfaces.
WPS buttons
The Wi-Fi Protected Setup buttons are labeled WPS2.4G and WPS5G.
These buttons enable and disable WLAN data encryption.
WLAN button
Wi-Fi service is compliant with IEEE 802.11 standards and is enabled
and disabled using the WLAN button.
Reset button
This button resets the ONT to the factory defaults.
Power input
This connection is provided through the power connector. A power
cable fitted with a barrel connector is used to make the connection.
On/Off button
This button turns the ONT on or off.
(2 of 2)
Note
(1)
The primary path for the earth ground for these ONTs is provided by the 12V Return signal in the
power connector.
1.5 G-240W-B LEDs
Figure 1-2 shows the G-240W-B indoor ONT LEDs.
Figure 1-2 G-240W-B indoor ONT LEDs
LAN1
LINK AUTH
BTR
POWER
LAN2
LAN3
LAN4
TEL1
TEL2
VOIP
WPS
2.4G
WPS
5G
WLAN
2.4G
WLAN
5G
USB
INTERNET
POWER BT R LINK AUTH LAN1 LAN2 LAN3 LAN4 TEL1 TEL2 VOIP WPS WPS WLAN WLAN USB INTE RN ET
2.4G 5G 2.4G 5G
24615
Table 1-5 provides LED descriptions for G-240W-B indoor ONTs.
1-6 Alcatel-Lucent 7368 ISAM ONT
Edition 01
G-240W-B Product Guide