User's Manual

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01

4 — Configure a G-240W-B indoor ONT

Procedure 4-38 Modify the operator ID using OLT

1 Create a new .xml file named OntConfig.xml.

a For AONT releases

AONTR2.4.02

and higher, add the following content to the

OntConfig.xml file:

<OperatorObject="xxxx">

</OperatorObject>

where xxxx is the correct operator ID, such as PTXX.

b For AONT releases prior to AONTR2.4.02, add the following content to the

OntConfig.xml file:

<OpertaorObject="xxxx">

</OpertaorObject>

where xxxx is the correct operator ID, such as PTXX.

2 Use a TFTP client tool to transfer OntConfig.xml to the OLT's ONT directory and

change the filename to the software version number, for example,

FE54869201410.xml.

3 Using TL1 commands, configure ONUSWCTRL:

ENT-ONTSWCTRL::1::::HWVER=hwver,VARNT=,PLNDSWVER=UNPLANNED,

PLNDSWVERCONF=UNPLANNED,DLDSWVER=swver;

where:

hwver is the hardware version number, for example 3FE54945ABBA.

swver is the software version number used as the filename in step 2, for example

3FE54869201410.

4 Download the .xml file to update the operator ID:

ED-ONT::ONT-1/1/3/1/19::::DLSW=AUTO;

5 Restart the ONT, then connect to the LAN and access the web-based to check the

operator ID default setting.

6 Using TL1 commands, disable further downloads:

ED-ONT::ONT-1/1/3/1/19::::DLSW=DISABLED;

7 STOP. This procedure is complete.

Alcatel-Lucent 7368 ISAM ONT 4-45

Edition 01

G-240W-B Product Guide