User's Manual

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01
4 — Configure a G-240W-B indoor ONT
Procedure 4-37 SLID configuration
1 Select Maintain > SLID Configuration from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-37.
Figure 4-37 SLID configuration window
Table 4-28 describes the fields in the SLID configuration window.
Table 4-28 SLID configuration parameters
Field
Description
Current SLID
Displays current SLID
Input new SLID
Enter new SLID
SLID Mode
Choose a SLID mode from the drop-down menu.
2 Configure the new SLID.
3 Click Save.
4 STOP. This procedure is complete.
4.4 Operator ID
Use the procedure below to modify the operator ID for the G-240W-B.
4-44 Alcatel-Lucent 7368 ISAM ONT
Edition 01
G-240W-B Product Guide