User's Manual

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01

4 — Configure a G-240W-B indoor ONT

4 The log file is displayed at the bottom of the window.

5 STOP. This procedure is complete.

4.3 SFU mode GUI configuration

Use the procedures below to use the web-based GUI for the G-240W-B in SFU

mode. This mode is preset at delivery.

SFU customer premise devices are designed for single indoor residential

applications. These ONTs address

the

demand

for

bandwidth intensive services,

such

as high definition television (HDTV), video-on-demand (VOD) and online games.

The ONT can be configured to seamlessly deliver voice-over-IP and high speed

Internet access via a single fiber optic connection to the home.

Use the procedure below to login to the web-based GUI for the G-240W-B.

Procedure 4-33 Login to web-based GUI

1 Open a web browser and enter the IP address of the ONT in the address bar.

The login window appears.

The default gateway IP address is http://192.168.1.254. You can connect to this

IP address using your web browser after connecting your PC to one of Ethernet

ports of the ONT. The static IP address of your PC must be in the same subnet as

the ONT.

2 Enter your username and password in the Log in window, as shown in Figure 4-33.

The default username and password are printed on the ONT. The default

superuser username is adminGPON. Contact Alcatel-Lucent for the superuser

password.

Alcatel-Lucent 7368 ISAM ONT 4-39

Edition 01

G-240W-B Product Guide