User's Manual
R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01
ETSI ONT safety guidelines
Figure 1 PSE certification
Warning
This is a
Class
B
product based
on the
standard
of
the Voluntary Control Council
for Interference
from Information Technology Equipment (VCCI).
If this is
used near
a
radio
or
television receiver
in
a
domestic environment,
it may
cause radio interference. Install
and use the
equipment
according
to the
instruction
manual.
19841
Safety standards compliance
This section describes the ONT compliance with the European safety standards.
EMC, EMI, and ESD compliance
The ONT equipment complies with the following EMC, EMI, and ESD
requirements:
• EN 300-386 V1.3.2 (2003-05): Electromagnetic Compatibility and Radio
Spectrum Matters (ERM): Telecommunications Network Equipment;
Electromagnetic Compatibility (EMC) requirements; Electrostatic Discharge
(ESD) requirements
• EN 55022 (1998): Class B, Information Technology Equipment, Radio
Disturbance Characteristics, limits and methods of
measurement
• EN 55024 (1998): Information Technology Equipment, Immunity
Characteristics, limits and methods of measurement
• European Council Directive 2004/108/EC
• EN 300-386 V1.4.1: 2008
• EN 55022:2006 Class B (ONTs)
• EN EN 61000-3-2:2006
• EN EN 61000-3-3:2008
• IEC 61000-4-2:2001
• IEC 61000-4-3:2006
• IEC 61000-4-4:2004
• IEC 61000-4-5:2005
• IEC 61000-4-6:2003/A1:2004/A2:2006
• IEC 61000-4-11:2004
Equipment safety standard compliance
The ONT equipment complies with the requirements of EN 60950-1, Safety of
Information Technology Equipment for use in a restricted location (per R-269).
Alcatel-Lucent 7368 ISAM ONT xi
Edition 01
G-240W-B Product Guide