User's Manual

3 — Replace a G-240W-A indoor ONT
Alcatel-Lucent 7368 ISAM ONT 3-5
Edition 02
G-240W-A Product Guide
Figure 3-2 G-240W-A indoor ONT connections (back view)
5 Disconnect the fiber optic cables.
i Unplug the fiber optic cable with SC/APC connector from the ONT; see
Figure 3-2 for the location of the fiber optic port.
ii Attach a fiber dust cover to the end of the SC/APC connector.
6 Replace the ONT with a new unit:
a On a flat surface, such as a desk, substitute the new ONT for the old ONT on
a flat surface, horizontally resting on its four feet.
b On a wall.
i Slide the old ONT off of the mounting screws until the ONT is free of the
wall.
ii Slide the wall mount holes on the ONT enclosure over the mounting
screws until it is securely seated.
7 Connect the Ethernet cables directly to the RJ-45 ports; see Figure 3-2 for the
location of the RJ-45 ports.
8 Connect the POTS cables directly to the RJ-11 ports as per local practices; see
Figure 3-2 for the location of the RJ-11 ports.
The RJ-11 port to the left is labeled 1 for Line 1 while the port on the right is
labeled 2 for Line 2.
Danger — Fiber cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.
LAN4
PON
LAN3 LAN2 LAN1 WPS WLAN RESET USB POWER ON/OFF
TEL2 TEL1
Ethernet ports (4)
(RJ-45)
POTS
ports (2)
(RJ-11)
USB
port
Reset
button
Wireless
On/Off
button
Wi-Fi
security
button
Fiber
Optic
port
24434
On/Off
button
Power
input
R05.02.01 | October 2015 | 3FE-45360-AAAA-TCZZA | Edition 02