User's Manual

Configure a G-120W-F indoor ONT
138
7368 ISAM ONT G-120W-F Product Guide
3FE-46922-AAAA-TCZZA Issue: 01
2 Configure the test times if desired.
3 Click Refresh to update the data.
4 STOP. This procedure is complete.
8.3 SFU mode GUI configuration
Use the procedures below to use the web-based GUI for the G-120W-F in SFU
mode.
SFU customer premise devices are designed for single indoor residential
applications. These ONTs address the demand for bandwidth intensive services,
such as high definition television (HDTV), video-on-demand (VOD) and online
games. The ONT can be configured to seamlessly deliver voice-over-IP and high
speed Internet access via a single fiber optic connection to the home.
8.3.1 Login
Use the procedure below to login to the web-based GUI for the G-120W-F.
Procedure 50 Login to web-based GUI
1 Open a web browser and enter the IP address of the ONT in the address bar.
The login window appears.
The default gateway IP address is http://192.168.1.254. You can connect to this IP address
using your web browser after connecting your PC to one of Ethernet ports of the ONT. The
static IP address of your PC must be in the same subnet as the ONT.
Latency Click Latency Test to specify the time for the test
The default is weekly, performed at idle to a public server
DNS Response Time Click DNS Response Test to specify the time for the test
The default is weekly, performed at idle to a public server
Port Mirror Choose the source and destination ports, the direction (up or down),
and the status (enable or disable) from the drop-down menu, and
click Save
Field Description
(2 of 2)
R05.06.01 | June 2017 | Edition 01