User's Guide

Configure an A-240Z-A CPE 7368 ISAM CPE A-240Z-A Product Guide

78 3FE-46615-AAAA-TCZZA Issue: 01



Procedure 17 WAN networking configuration

Select Network > WAN from the top-level menu in the Ethernet Gateway window, as shown

in Figure 26.

Figure 26 WAN network window

Table 22 describes the fields in the WAN network window.

Table 22 WAN network parameters

Field Description

WAN Connection List

Choose a WAN connection from the drop-down menu to set the connection

parameters

Access Type Choose an access type from the drop-down menu

Connection Type Select a connection type: IPoE or PPPoE

IP Mode Choose an IP mode from the drop-down menu: IPv4 or IPv6

Enable/Disable Select this checkbox to enable the WAN connection

NAT Select this checkbox to enable NAT

Service Select the checkboxes to enable service types for this connection

Enable VLAN Select this checkbox to enable VLAN

VLAN ID Enter the VLAN ID

(1 of 2)