User's Guide

Configure an A-240Z-A CPE 7368 ISAM CPE A-240Z-A Product Guide

74 3FE-46615-AAAA-TCZZA Issue: 01



Procedure 15 LAN networking configuration

Select Network > LAN from the top-level menu in the Ethernet Gateway window, as shown

in Figure 24.

Figure 24 LAN network window

Table 20 describes the fields in the LAN network window.

Table 20 LAN network parameters

Field Description

IPv4 Address IP Address of the CPE

Subnet Mask Subnet mask of the CPE

DHCP enable Select this checkbox to enable DHCP

DHCP Start IP Address Starting DHCP IP address

DHCP End IP Address Ending DHCP IP address

DHCP Lease Time DHCP lease time (in min)

(1 of 2)