User's Guide
Configure an A-240Z-A CPE 7368 ISAM CPE A-240Z-A Product Guide
120 3FE-46615-AAAA-TCZZA Issue: 01
Procedure 48 Diagnose connections
1
Select Maintenance > Diagnostics from the top-level menu in the Ethernet Gateway window,
as shown in Figure 57.
Figure 57 Diagnostics window
2
Choose a WAN connection to diagnose from the drop-down menu.
3
Enter the IP address or domain name.
4
Select the test type: ping, traceroute, or both.
5
Enter the number of ping attempts to perform (1 - 1000); the default is 4.
6
Enter a ping packet length (64-1024); the default is 64.
7
Enter the maximum number of trace hops (1-255); the default is 30.