User's Guide

7368 ISAM CPE A-240Z-A Product Guide Configure an A-240Z-A CPE

Issue: 01 3FE-46615-AAAA-TCZZA 101



Procedure 32 Port forwarding configuration

Select Application > Port forwarding from the top-level menu in the Ethernet Gateway

window, as shown in Figure 41.

Figure 41 Port forwarding window

Table 36 describes the fields in the port forwarding window.

Table 36 Port forwarding parameters

Field Description

Application Name Choose an application name from the drop-down menu

WAN Port WAN port range

LAN Port LAN port range

Internal Client

Choose a connected device from the drop-down menu and enter

the associated IP address

Protocol

Choose the port forwarding protocol from the drop-down menu:

• TCP

• UDP

• TCP/UDP

Enable Mapping Select this checkbox to enable mapping

WAN Connection List Choose a WAN connection from the drop-down menu

Note: only active devices are shown on this menu