Instructions

WLAN Configuration
Stellar AP User Guide
ALCATEL-LUCENT ENTERPRISE 64
the client checks for buffered data on the AP at every beacon. User can also
configure a higher DTIM value for power saving.
The WLAN Creation Window is closed if you click ‘Cancel’ button.
Click ‘Save’ to save the configuration and create the WLAN.
Create a Captive Portal WLAN
Captive Portal WLAN creation window has two display modes, simplified mode and advanced mode,
respectively illustrated in Figure 5-5 Create Captive Portal WLAN - Simplified Mode and Figure 5-6 Create
Captive Portal WLAN - Advanced Mode. You can switch to advanced mode from simplified mode by clicking
the hyperlink .
There are three essential parameters to be configured for a Captive Portal WLAN in simplified mode, they
are WLAN Name, Security Level (Open) and Captive Portal (Yes). Other parameters will be considered as
per the default value. To configure other advanced parameters, you must switch to advanced mode. Refer
to Table 5-3 for details about each parameter.
Figure 5-5 Create Captive Portal WLAN - Simplified Mode