Instructions

Introduction to the AP Group Web Management System
Stellar AP User Guide
ALCATEL-LUCENT ENTERPRISE 53
Access Control List Window
There are two modes for ACL Window, Simplified Mode illustrated in Figure 4-46 and Advanced Mode
illustrated in
Figure 4-47. You can launch the Advanced Mode from Simplified Mode by clicking the ACL Window Frame.
The simplified ACL Window displays the ACLs configured, illustrated in Figure 4-46.
You can create L3 ACLs using wildcard entries for both IP address and TCP/UDP/ICMP ports. See the
advanced ACL Window illustrated in
Figure 4-47.
The ACL rules created in the list are applied sequentially, based on the precedence of top-to-bottom.
By default, traffic is allowed to pass if no ACL rules are matched (Default ACL action is ‘Accept’).
Figure 4-46 ACL Window – Simplified Mode
Figure 4-47 ACL Window – Advanced Mode