Instructions

Introduction to the AP Group Web Management System
Stellar AP User Guide
ALCATEL-LUCENT ENTERPRISE 34
You can also specify the Time Zone and daylight-saving time of the AP group to coordinate with the local
time. The daylight-saving time is automatically enabled on supporting time zone.
Note 4-5: In order to ensure time synchronization, it is recommended to check the reachability before adding
an NTP server. If the NTP server is not configured or is unreachable, an AP reboot may lead to variation in
time.
Syslog & SNMP Window
Syslog is a standard for message logging. Syslog is used for system management and security auditing as
well as general informational, analysis, and debugging messages.
APs in group generate logs following the standard of Syslog, you can view logs and configure corresponding
attributes in the Syslog Window.
Upper part of the Syslog Window displays error (and lower, see in Note 4-5) level Syslog generated by APs
in the group.
Title is the content of the log message.
Level is the severity of the log message.
Source is the generator’s IP address of the log message.
When you move the mouse cursor to certain row of log message, the generating time of the log displays,
illustrated in Figure 4-21 Syslog Window.
Figure 4-21 Syslog Window
Log Level: Setting of Syslog message severity. If certain level is specified, the AP group will generate
Syslog messages including all lower levels. That is, if Syslog messages are separated by individual severity,