Instructions

Introduction to the AP Group Web Management System
Stellar AP User Guide
ALCATEL-LUCENT ENTERPRISE 20
WLAN Name
Label or name of WLAN.
Status
Indicates the WLAN state, indicates that WLAN is in broadcast state, while
indicates WLAN is not in broadcast state.
Security Level
Security Level of WLAN, from high to low is Enterprise>Personal>Open.
Captive Portal
Indicates whether the WLAN is using captive portal authentication. Yes means the
WLAN is configured with captive portal authentication, while No means the WLAN is
without captive portal authentication.
Operate
Operation for the WLAN. see Modify Your WLAN, see Delete Your WLAN,
see Modify WLAN QoS.
Link for Creating new WLAN, see Create New WLAN.
AP Window
AP Window is integrated with all APs and group related monitoring and configuration functions. Similar to
the WLAN Window, there are two modes for AP Window, Simplified Mode illustrated in Figure 4-4 and
Advanced Mode illustrated in Figure 4-5. You can easily launch the Advanced Mode from Simplified Mode by
clicking the AP Window Frame.
Figure 4-4 AP Window-Simplified Mode
Table 4-3 Key word specification in AP Window (Simplified Mode)
Primary Name
AP Mac address.
Status
Connection status of AP, there are three indication for AP status, they are Working,
Down and Joining. See more in Note 4-2.
Clients
The total number of users currently connected to AP.
Note 4-2: AP has three status indications when connecting to group, they are ‘working’ which indicates that
AP has connected to the PVM successfully and is working normally, ‘Down’ indicates that AP is disconnected
from the group, and ‘Joining’ indicates that AP is requesting to join the group but hasn’t completed yet. The
Label in AP Window indicates the number of APs in each status.
Select an AP from the AP Configuration Window (Advanced Mode), you can learn the detailed information
of the AP, see in Figure 4-5.