Instructions

Connecting AP Group via Web Browser
Stellar AP User Guide
ALCATEL-LUCENT ENTERPRISE 16
Step5: Complete Confirmation Page
Figure 3-6 Initialization Wizard-Complete Notice
Note 3-8: While configuring the Initialization Wizards, please make sure your configuring terminal is connected
to the pre-defined WLAN ’mywifi-xxxx’ to keep the communication operational between AP group (or AP) and
web browser. If not, you may encounter the following prompt and fail to complete the wizard configuration
correctly:
Note 3-9: The pre-defined WLAN ’mywifi-xxxx’ is deleted when the wizard is completed. For additional
configuration through the wireless connection you need to connect to the new WLAN created in the wizard
and then login to the web main page with your new administrator password.
Connecting to the AP Group via Web
When the initializing wizard has completed and new WLANs have been created, you can connect to each of
the WLANs and browse the URL http://mywifi.al-enterprise.com:8080 to manage the AP group.
Another way of connecting to the AP group web management system is through the AP group management
IP address. For information on setting of the Management IP address refer to AP Group Management.
The AP group web management system can be accessed through the wired network if the group
management IP address is configured and is reachable.
PVM/SVM Election and AP Group Scalability
The APs with the same cluster ID will form a group and it will select the Primary Virtual Manager (PVM) and
Secondary Virtual Manager (SVM) based on AP model and MAC address. The PVM election rules are as following: