Instructions

AP UI
Stellar AP User Guide
ALCATEL-LUCENT ENTERPRISE 97
Figure 9-6 Configure Mesh Root
Figure 9-7 Configure Mesh Leaf
Edit the Backhaul/Connector interface to complete the MESH configuration. Either Backhaul configuration
or Connector configuration is sufficient. The last saved configuration will be effective if Backhaul1 and
Connector1 are both configured:
• Enable – Enable/disable the wireless mesh on the AP.
• Mode – AP working mode, mesh mode or bridge mode.
• SSID – WLAN used to setup wireless mesh connection (SSID ‘Stellar-MESH’ is built-in for Out-of-box
MESH, it can be modified to become a regular MESH SSID).
• Band – Mesh working band. All the mesh connection from root node to leaf shall be in the same
band.
• Is Root – Specify the root node of the wireless mesh chain.
• Passphrase – Password of the WLAN used to setup wireless mesh connection.
• Confirm – Re-enter the password to confirm.