Instructions

WLAN Configuration
Stellar AP User Guide
ALCATEL-LUCENT ENTERPRISE 60
broadcast on 12 Mbps rate and other management frames (such as probe frame)
will broadcast on 9 Mbps.
OKC
If OKC is enabled, a cached pairwise master key (PMK) is used when the client
roams to a new AP. This allows faster roaming of clients without the need for a
complete 802.1x authentication.
DTIM Interval
The DTIM interval indicates the DTIM period in beacons, which determines how
often the AP should deliver the buffered broadcast and multicast frames to
associated clients in the power save mode. The default value is 1, which means
the client checks for buffered data on the AP at every beacon. User can also
configure a higher DTIM value for power saving.
The WLAN Creation Window is closed if you click ‘Cancel’ button.
Click ‘Save’ to save the configuration and create the WLAN.
Create a Personal WLAN
Personal WLAN creation window has two display modes, simplified mode and advanced mode, respectively
illustrated in Figure 5-3 and Figure 5-4. You can switch to advanced mode from simplified mode by clicking
the hyperlink .
There are five essential parameters to be configured for a Personal WLAN in simplified mode, they are
WLAN Name, Security Level, Key Management, Password Format and Password. Other parameters will be
considered as per the default value. To configure other advanced parameters, you must switch to advanced
mode. Refer to Table 5-2 for details about each parameter.
Figure 5-3 Create Personal WLAN - Simplified Mode