Instructions

Introduction to the AP Group Web Management System
Stellar AP User Guide
ALCATEL-LUCENT ENTERPRISE 28
Table 4-10: Key word specification in Client Monitoring Window
RX
Receiving rate of the client.
TX
Sending rate of the client.
RSSI
Received Signal Strength Indication of the client
PHY RX
Physical receiving rate of the client.
PHY TX
Physical sending rate of the client.
Note 4-3: The data shown in the monitoring window is collected and displayed while the window is open.
The data is not stored and no historical view of the data is available.
System Page
The System page focus on the basic settings of the AP group, including: AP group attributes, system
management accounts, system time and syslog.
It is divided into three windows in System Page: General window, System Time window and Syslog window,
illustrated in Figure 4-12 System page.
Figure 4-12 System page
General Window
General Window displays the basic information of the wireless system. There are two modes for General
Window, Simplified Mode illustrated in Figure 4-13 General Window – Simplified Mode and Advanced Mode
illustrated in Figure 4-14 General Configuration Window –Advanced Mode. You can launch the Advanced Mode
from Simplified Mode by clicking the General Window Frame.