Instructions

AP UI
Stellar AP User Guide
ALCATEL-LUCENT ENTERPRISE 101
• Destination IP – Mapping destination IP address of the NAT rule, single IP or segment.
• Source Port – Mapping source port of the NAT rule.
• Destination Port – Mapping destination port of the NAT rule.
• Protocol Type – Network protocol to which the NAT rule is applied.
• Output Interface – Specify the outbound interface of the NAT rule.
• Translation – Use Masquerade, indicates the internal IP addresses will be translated to the interface
IP address (gateway) of the network.
Destination NAT
Figure 9-12 Destination NAT
Destination NAT can be utilized to realize visiting specific server in the internal network from internet.
• Name – Name of the destination NAT rule.
• Source IP - Mapping source IP address of the NAT rule, single IP or segment.
• Destination IP - Mapping source port of the NAT rule.
• Source Port – Mapping source port of the NAT rule.
• Destination Port – Mapping destination port of the NAT rule.
• Protocol Type - Network protocol to which the NAT rule is applied.
• Input Interface - Specify the inbound interface of the NAT rule.
• Translation
o IP – IP address to which the external IP address will be translated
o Port - Port to which the external IP address will be translated
Configure Static Neighbor AP through AP UI
Navigate: AP-UI -> Neighbor AP.
Neighbor AP is the candidate to which clients connecting to current AP might roam. There two types of
neighbor AP – Auto Neighbor AP as well as Static Neighbor AP. Auto Neighbor AP is discovered through
wireless scanning automatically, while Static Neighbor AP is manually added.