Data Sheet

3
Datasheet
Alcatel-Lucent OmniAccess Stellar AP1101
Product specications
Dimensions/weight
Single AP excluding packing box
and accessories:
¬ 155 mm (W) x 155 mm (D) x
28 mm (H)
¬ 6.10 in (W) x 6.10 in (D) x
1.10 in (H)
¬ 270 g (0.6 lb)
Including AP, packing box and
accessories:
¬ 185mm (W) x 172mm (D) x
57mm (H)
¬ 7.28” in (W) x6.77 in (D) x
2.24 in (H)
¬ 467 g (1.0 lb)
Environmental
• Operating:
¬ Temperature: 0°C to 45°C
(+32°F to +113°F)
¬ Humidity: 5% to 95% non-
condensing
Storage and transportation:
¬ Temperature: -40°C to +70°C
(-40°F to +158°F)
Mounting
Wall mount, ceiling tile and desktop
Power
Maximum (worst case) power
consumption:
¬ 10 W (802.3at PoE or DC)
Direct DC source:
¬ 48 V DC nominal, ± 5%
Power over Ethernet (PoE):
¬ 48 V DC (nominal)
802.3af/802.3at compliant
source
¬ When both power sources
are available, DC power takes
priority
Interfaces
1× 10/100/1000 Mb/s full/half-
duplex Ethernet (RJ-45)
PoE-PD: 48 V DC (nominal)
802.3af or 802.3at PoE
Security lock slot
Reset button: Factory reset
Visual Indicators (Tri-color
LEDs)
For system and radio status
¬ Red ashing: System abnormal,
link down
¬ Red light: System startup
¬ Red and blue rotate ashing:
System running, OS upgrading
¬ Blue light: System running, dual
bands working
¬ Green ashing: System running,
no SSID created
¬ Green light: System running,
single band working
¬ Red, blue and green rotate
ashing: System running, use for
location of an AP
Antenna
Built-in 2×2:2, 3.4 dBi @ 2.4 GHz,
2.55 dBi @ 5 GHz
Receive sensitivity
(dBm per receive chain)
2.4 GHz 5 GHz
1 Mb/s -91
11 Mb/s -85
6 Mb/s -87 -87
54 Mb/s -70 -70
HT20 (MSC 0/8) -85 -83
HT20 (MSC 7/15) -67 -65
HT40 (MSC 0/8) -82 -80
HT40 (MSC 7/15) -64 -62
VHT40 (MSC 0) -59
VHT40 (MSC 9) -57
Maximum Transmit power
(per chain)
2.4 GHz 5 GHz
1 Mb/s 17 dBm
11 Mb/s 17 dBm
6 Mb/s 17 dBm 20 dBm
54 Mb/s 15 dBm 18 dBm
HT20 (MSC 0/8) 17 dBm 20 dBm
HT20 (MSC 7/15) 15 dBm 18 dBm
HT40 (MSC 0/8) 17 dBm 20 dBm
HT40 (MSC 7/15) 15 dBm 18 dBm
VHT80 (MCS0) 20 dBm
VHT80 (MCS9) 16 dBm
IEEE standard
IEEE 802.11a/b/g/n/ac wave1
IEEE 802.11e WMM
IEEE 802.11i, 802.11e QoS,
802.11r fast roaming
IEEE 802.1Q (VLAN tagging)
802.11k Radio Resource
Management
802.11v BSS Transition
Management
Reliability
MTBF: 739,935h (84.5 years) at
+25ºC operating temperature
Capacity
Up to 8 SSID per radio (total 16
SSID)
Support for up to 255 associated
client devices per AP
Radio specication
Supported frequency bands are
as below and available channels
depend on congured regulatory.
¬ 2.400 to 2.4835 GHz
¬ 5.150 to 5.250 GHz
¬ 5.250 to 5.350 GHz
¬ 5.470 to 5.725 GHz
¬ 5.725 to 5.850 GHz
Frequencies xed at factory
for Middle East model OAW-
AP1101-ME:
¬ 2400 - 2483.5 MHz
¬ 5150 - 5350 MHz
DFA (Dynamic Frequency
Adjustment) optimizes available
channels and provides proper
transmission power
Short guard interval for 20-MHz,
40-MHz and 80-MHz channels
Transmit beamforming (TxBF) for
increased signal reliability and
range
Supported data rates (Mb/s):
¬ 802.11b: 1, 2, 5.5, 11
¬ 802.11a/g: 6, 9, 12, 18, 24, 36,
48, 54
¬ 802.11n: 6.5 to 300 (MCS0 to
MCS15)
¬ 802.11ac: 6.5 to 867 (MCS0 to
MCS9, NSS = 1 to 2)
¬ 802.11n high-throughput (HT)
support: HT 20/40
¬ 802.11ac very high throughput
(VHT) support: VHT 20/40/80
¬ 802.11n/ac packet aggregation:
Aggregated Mac Protocol Data
Unit (A-MPDU), Aggregated Mac
Service Data Unit (A-MSDU)
Chile: Regulatory compliance. Maximum transmit
power of 150mW including antenna gain.
Software feature
Scale up to 4K APs when OV2500
managed, no limit on number of
AP groups
Scale up to 32 APs per web-
managed cluster (only AP1101)
Scale up to 64 APs per web-managed
cluster with mixed AP models (min
qty of 4 AP12xx required)
Bandwidth capping per user
L2 roaming
L3 roaming with OmniVista 2500
Captive portal (Internal/ External)
Guest self-registration (optional
SMS notication) with OmniVista
2500
Guest social-login with OmniVista
2500
RADIUS proxy authentication
OmniVista 2500
LDAP/AD proxy authentication
OmniVista 2500
Wireless QoS
Rogue AP detection and
containment