User's Manual

End-User Reference Guide
31
Technical Specifications
This section presents LED, radio, electrical, environmental, and mechanical
specifications for your OmniAccess 3500 NLG card.
LED Specifications
You find two LED bars on the external end of your OmniAccess 3500 NLG card. From
left to right under the Alcatel-Lucent logo:
• LED A (3G Modem) can be in one of the following states:
o No light: 3G modem is off.
o Slow-blinking amber light: 3G modem is on.
o Fast-blinking amber light: 3G modem is transmitting.
• LED B (NLG) can be in one of the following states:
o No light: Card is in sleep mode or off.
o Solid red light: Card is up, and can accept user input from Host (e.g.
authentication credentials when applicable).
o Solid amber light: Tunnel is up but user is not authenticated. Only
management traffic can flow across the card and the gateway but no user
traffic.
o Solid green light: card is up, VPN tunnel is up and user is authenticated.
Indicates that user has access to enterprise network.
Radio Frequency and Electrical Specifications
Approvals Compliant with:
CE
GCF
FCC
IC
IEEE 1725: In progress
PTCRB: TBD
Data Services
850/900/1800/1900/2100 MHz WCDMA — DL up to 7.2 Mbps, UL up to
2.0 Mbps
Voltage +3.3 VDC from PCMCIA Slot
Frequency Bands
850/1900/2100MHz WCDMA