User's Manual

OmniAccess 3500 Nonstop Laptop Guardian Release 1.6

5. You will get a Hardware Installation screen. Click Continue Anyway.

Figure 29: Gadget Serial software installed

6. Click Finish to complete.

Card, Laptop and SIM

How do I remove the card from my laptop?

Strictly observe the following procedure for extraction of the card depending on the

power state of your laptop:

• Laptop in Power On state — You MUST stop the OmniAccess 3500 NLG card device

on the Safely Remove Hardware Windows utility before you physically extract

the card from the CardBus slot in your laptop. Failure to run the Safely Remove

Hardware utility may compromise the future operation of your card and laptop.

• Laptop in Standby/Hibernate/Power Off state — You MAY extract the

OmniAccess 3500 NLG card from the CardBus slot after your laptop enters the

Standby, Hibernate, or Power Off mode. In that case, you MUST always plug the

card back into the CardBus slot before your laptop powers up again. Failure to

plug the card back in before power-up will result in NLG-locking of the laptop.

How to upgrade modem firmware?

Follow the procedure to upgrade the firmware of OmniAccess 3500 Nonstop Laptop

Guardian Card (EVDO).